Fuji Spray 6863G-H-V8-N Gravity Feed Spray Gun 600cc Nylon Cup
Fuji Spray 6863G-H-V8-N Gravity Feed Spray Gun 600cc Nylon Cup
Fuji Auto H-V8 gravity feed spray gun with 600cc nylon cup:
Optimized for spraying smooth, flawless automotive base coats
“High pressure low volume” (HVLP) - Operates best at 14.7 cfm at 28 psi
Non-corrosive stainless steel fluid passages
360-degree swivel air inlet to prevent tangling, reduce drag
Side-mounted fan pattern control knob
1.4 mm air cap installed (6890H series)
600 cc (20-oz) nylon gravity cup #6840 (requires no gaskets)
Can also be used with 3M PPS 2.0 disposable spray cup system (requires S15 adapter)
Fuji 12-month warranty
Pay in 4 interest-free payments of $119.75 — (At checkout, choose PayPal as your payment method, then choose Pay in 4.)
Available separately:
Additional air caps in 6890H series: 1.2, 1.4, 1.7, 2.0, 2.2 mm)
1/4-in. Digital Air Flow Gauge with Locking Adjustment Valve #6873
#S15 adapter for using 3M PPS 2.0 standard cups and liners
VOC-Compliant - Transfer rate efficiency higher than 85 percent.
UPS Shipping is free to lower-48 states; Priority Mail rates apply for the rest of the U.S.A. For shipping rates elsewhere, check out with “SKIP SHIPPING TILL PAYPAL INVOICE.”
Fuji H-V8 Specifications:
Recommended 14.7 cfm at 28 psi
Operating Range - 9 - 28 psi
Air Inlet Size - 1/4" BSP and NPS
Air Consumption - 14.7 CFM
Gun Weight - 18.38 oz
Application Type - Waterborne and solvent borne high-solid clear coat
Max Fan Width - 325mm (12.8 inches)
Kit Includes:
H-V8 spray gun w/ 1.4 mm spray tip installed
600cc (20.28 oz.) nylon gravity cup
Fuji 6380 Pressure Regulator Gauge
You may also be interested in:
The digital Fuji 6873 ¼-in. Air Flow Gauge with Locking Adjustment Valve.
Fuji 6890 Air Cap Setups.
Fuji 9030-10 Stainless steel strainers.
For spraying clear coats, the Fuji MP-V8 spray gun (which uses only series 6800 air caps)