Accessories

The following accessories can be purchased separately
without buying a system, a shipping charge will be added unless you meet our minimum order amount for free shipping. If you
want to purchase them with a system just check the system packages. Or if you order accessories in addition to
a package or system at the same time there will be no shipping charge.

If you do not see any parts that you may want on the website, just call we will either have the part or accessory or be able to drop ship it to you!

Free shipping for orders over $50

US destinations only

We choose the shipping method

AIR CAP SETUPS

MAINTENANCE KITS, GASKETS, PRESSURE TUBES

TURBINE FILTERS

SPRAY CUPS

WORTHY STRAINERS

MISCELLANEOUS PART

Check Out the High Efficiency Air Cap

The Fuji Hi-Flex™ Hose

The Fuji 25' Hi-Flex™ Hose is standard with all 3 systems shown. The plastic hoses typical with most HVLP turbine systems are hard and stiff making the spray gun difficult to maneuver. The Hi-Flex™ Hose is not only flexible at different temperatures, it will stay flexible over the years (unlike the plastic hoses that become stiffer with age due to the emission of plasticizers). The air control valve gives instantaneous and absolute control over the air flow right next to the spray gun where it belongs. The air flow can be cut back for spraying the insides of cabinets where less bounce back is desired or in situations where less over spray is needed. It is a better alternative to a variable speed turbine since the speed of the turbine is kept high allowing the turbine cooling fan to efficiently do its job and not let heat build up in the motor.
Extra Hi-Flex™ Hose w/couplings ordered separately
(Every system order includes one Hi-Flex™ Hose)

Blue Hi-Flex Hose includes quick connect and air control valve: $73.00

Check out the 2 1/2 gallon pressure paint pot

2 Quart Cup w/hoses and Fittings

If you have an air compressor to power this cup it will work great with Fuji systems. Only needs about 10 lb of pressure to operate on. Comes with all necessary fittings, ships free with system purchase. (Not recommended for use with lacquer or lacquer thinner).

$105.00

Pot To Turbine Kit

Use the 2 Quart pressure pot (order above), without an air compressor powered totally by your turbine with the 'pot to turbine kit'. Great for tub spraying, cabinet spraying, spray in any direction with 2 quart capacity.
(Kit does not include 2 quart cup, hoses, and spray gun...order separately)
$75

Must be used with a whip hose, if you do not have one order here:
6' Whip Hose
$29.99

Click Here for Installation Diagram

Mini 3-cup Set
$42.75

View Mini 3-Cup Video

Complete 1/2 pint (8ozs) miniature cup assembly. Supplied with 2 extra cups and 3 heavy-duty lids equipped with gaskets. This assembly is lightweight taking weight off the wrist. The small size allows access into confined areas such as cabinets, bookshelves etc. Cup is pressurized so spray pattern is always perfect. You will think of many uses for these cups, storing paints, stains. Quick color changes. Any type of touch-up work. If you purchase the Mini 3-cup set with a system there will be no shipping charges, purchased separately it will incur a shipping charge.

***PLEASE NOTE MINI 3-CUP SET WILL ONLY WORK WITH THE G-Xpc, GT-X2, WITH THE "L" SWIVEL CONNECTOR, THE MINI 3-CUP SET WILL NOT WORK AT ALL WITH THE GTX SPRAY GUN***

Purchase the Mini 3-cup set along with the swivel "L" connector to use with the G-Xpc or GT-X2 spray guns
$57.75

Flexible Whip Hose
$29.99

View Video Demo of 6' Whip Hose

This Whip hose has the same properties as whip hose in demo.

Lightweight 6ft. flexible hose is highly flexible. Takes weight off the wrist and flexibility allows for effortless maneuverability of the spray gun. An added feature is that the air through the spray gun is not as hot (due to the fact the spray gun is now 6ft further from the turbine). This often alleviates problems with fast drying lacquers drying too quickly. If you purchase the Flexible Whip Hose with a system there will be no shipping charges, purchased separately it will incur a shipping charge

6' Whip Hose

$29.99

10' Whip Hose-Limited Supply

An Extra 4' of Cooling!

$44

Check Out the High Efficiency Air Cap

Click Here to Determine Which Fuji Spray Gun You are Purchasing Parts for

Spray Gun Air Cap Sets for Xpc and G-Xpc Pattern Control Spray Guns

#8050 Nozzle/Needle/Jet Set-Up #2,3,4,5, or 6

$54.95

(Click here for air cap guide)

Stop!! These tips will only fit the Xpc and G-Xpc Pattern Control Non-Bleed Spray Guns Purchased after 12/1/2009..... For the XT, XT-2, GTX, GT-X2 and Older SC-1 spray guns CLICK HERE.

ANY QUESTIONS AS TO WHICH AIR CAP WILL FIT YOUR MODEL OF SPRAY GUN FEEL FREE TO GIVE ME A CALL AT 800-377-5662 ANYTIME

PLEASE READ THE ABOVE WARNING BEFORE ORDERING!!!!

#2 Air Cap Set .7mm

#3 Air Cap Set 1mm

#4 Air Cap Set 1.4mm

#5 Air Cap Set 1.8mm

#6 Air Cap Set 2.mm

Spray Gun Spraying Tips

#9001 Nozzle/Needle/Jet Set-Up #3,4,5, or 6 for the XT Non- Bleeder Type Spray Guns With the High Efficiency Air Cap!

Stop!! These tips will only fit XT, XT-2, GTX, GT-X2 Non-Bleed Spray Guns Purchased between 11/2003 and 12/2009....for Older SC-1 spray guns see below.

$54.95 each

(Click here for air cap guide)

View Video Demo of Air Cap Installation

#3001 Nozzle/Needle/Jet Set-Up #3,4,5, or 6 for the SC-1 Bleeder Type Spray Guns, (these are the older bleed type spray guns usually purchased new before 12/2003)
$54.95 each

All Maintenance Kits Contain Turbine Filter(s) and Cup Maintenance Kit

Maintenance Kit for Q3 Gold, Q4 Gold,Q3, Q4, & Q4Pro™ & Q3Pro™ System-$27.00-info
For Bottom Feed Only...Consists of #5029 Filter and #2039 Cup Parts Kit

Gravity Maintenance Kit for Q3 Gold, Q4 Gold,Q3, Q4, & Q4Pro™ & Q3Pro™ System-$22.45

For Gravity Feed Only...Consists of #5029 Filter and #0033 Gravity Cup Parts Kit.

Maintenance Kit for Older Discontinued Super or SuperPro System-$28.30-info

Maintenance Kit for Mini-Mite System-$27.04-info

For Bottom Feed Only...Consists of #4009 Filter and #2039 Cup Parts Kit

Gravity Maintenance Kit for Mini-Mite System-$22.49

For Gravity Feed Only...Consists of #4009 Filter and #0033 Gravity Cup Parts Kit.

Maintenance Kit for the Super Gold, & Super 4 System $27.00-info

For Bottom Feed Only...Consists of #1044 Filter and #2039 Cup Parts Kit

Gravity Maintenance Kit for the Super Gold, & Super 4 System $22.45

For Gravity Feed Only...Consists of #1044 Filter and #0033 Gravity Cup Parts Kit.

Spray Gun Cup Maintenance Kit #2039 for Xpc, XT, SC-1 and Economy Spray Guns-$21.05

Contains 3-Diaphragms, 3 Cup lid Gaskets, and 3 Pressure Tubes w/Check Valves

Cup Parts Kit #0033 for Pressurized Gravity Spray Gun, G-Xpc or GT-X2

Contains: 3 Long Pressure Tubes w/Check Valves, and 3 Gravity Cup Lid Gaskets

$16.50

2024-5 Pressure Tube/Check valves

$14.75

2024L-5 Pressure Tube/Check valves..These are longer tubes for the Pressurized GXpc, GT-X2 Spray Gun

$16.75

2037-5 Cup Gaskets (Thin)

To be used WITH a Diaphragm

$15.00

2036-5 Cup Gaskets (Thick)

To be used WITHOUT a Diaphragm

$15.00

9050-3 Cup Gaskets for Gravity Cup

$9.00

2038 - Plastic Diaphragms

$9.75

8081-3...3 Gaskets for 8080 Pressurized 3oz Gravity Cup

$12.00

5029-Turbine Air Filter for Q3 Gold, Q3, Q3Pro, Q4, & Q4Pro

$5.95

View Video Demo of Filter Installation

4009 - Turbine Air Filter (Pair) for Mini-Mite

$5.99

2044 - Turbine Air Filter (Pair) for Older Discontinued Super System

$7.25

1044-Turbine Air Filter for Super Gold, & Super 4 Turbine

$5.95

2042-Assembled Cup

$34.50 without Teflon coating on Cup

$38.50 w/Teflon coated Cup

2041-Aluminum Quart Cup (Available in Teflon or Non-Teflon

Non-Teflon $20.00

Teflon $24.00

Hint!...Extra cups can help with cleaning the spray gun after use. By keeping an extra cup with thinner handy, after using the spray gun just take off the cup with the finish in it (you can also put a cup cap on it until you need to spray again), and attach the spray gun to the cup with the thinner in it, then spray the thinner through the spray gun to clean it out. Then you can store your cleaning thinner in the extra cup by putting a cup cap on it.

Cup Assembly

Without Cup

$15.00

Set of 3 Plastic Cups that will fit all Fuji Quart Cups-$2.97

G-Xpc, GT-X2 Presurized 400 ml Gravity Cup Assembly

$49.95 (not a conversion kit)

G-Xpc, GT-X2 Presurized 400 ml Gravity Cup Lid

$16.00

3oz Pressurized Gravity Cup

$49.95

Great for touch-up, Auto body, Bumper Finishing
Can be used with the Gxpc and GT-X2 spray guns
**NEW** Miniature 3ozs gravity cup is designed and built by Fuji Spray to meet the need for a small touch-up gravity cup for use in the automotive field. This cup can be used with any Fuji G-XPC Gravity Spray Gun. Perfect for spraying smaller items or touch up. The 8080 model (as shown) is pressurized and comes with one 2024 Pressure Tube with Check Valve installed.

Gravity Cup

(not possible to be pressurized)

75cc Stainless Steel

Great for touch-up, Auto body, Bumper Finishing

WILL NOT WORK WITH G-Xpc SPRAY GUN!

$39.95

Worthy Strainers-info

Will not work with the G-Xpc, GT-X2, or GTX spray gun.

Box of 10-$30.00

Box of 5-$18.00

Mini Worthy Strainers-info

Will not work with the G-Xpc, GT-X2, or GTX spray gun.

Box of 10-$15.00

Box of 5-$9.00

9044 Nylon Strainer

$1 each

Swivel "L" fitting for using a Fuji Gravity Spray Gun with a Pressure Pot

Includes an 8010 air plug

$15

click on image to enlarge

The above fitting can also be used to attach a quart cup to your Fuji GT-X2 or G-Xpc spray guns

(spray gun sold separately)

click on image to enlarge

Order a 1 quart cup assembly

with a swivel fitting Kit

$49.50 w/Aluminum Cup

$53.50 w/Teflon Coated Cup

Miscellaneous Parts:

Click Here to Determine Which Fuji Spray Gun You are Purchasing Parts for

Parts Package #7

Consists of: 2027 Spring Plate, 2028..Nozzle Spring , 8001 Collar, 8029 Fluid Knob, & 8019..Needle Spring (for XT, XT-2, GTX, and GT-X2 spray guns only) Hint!...These are the most commonly lost parts when cleaning the Spray Gun, I am regularly overnighting these parts for people who have lost one or more of them while cleaning. Keep these on hand and avoid a $20-$30 overnight shipping fee, and aggravation.

Package Price: $30